Walk-in showers and tub-to-shower conversions
Replace a dated tub or a cramped stall with a tiled walk-in shower, waterproofed on a proper pan and finished with glass.
- Licensed CSLB #1057886
- Based in Livermore
- Free in-person estimates
- Written, upfront quotes
QRS Remodeling, a licensed general contractor in Livermore (CSLB #1057886), builds walk-in showers and converts bathtubs to showers across the Tri-Valley, East Bay and South Bay. The work covers removing the old tub or stall, drain and valve changes, a waterproof shower pan (often a traditional hot mop), tile, niches, fixtures, a tempered glass enclosure, the permit and the city inspection.
What's included in walk-in showers and tub-to-shower conversions
- Removing the tub or old shower
- Drain and valve relocation
- Pressure-balancing shower valve
- Waterproof shower pan, including hot mop
- Mortar bed sloped to the drain
- Wall and floor tile, niches and benches
- Pebble or mosaic floors and linear drains
- Tempered glass doors and panels
- Blocking for grab bars and glass
- Permit and final inspection
Tub-to-shower conversions
Many Tri-Valley homes have a tub-shower combination that rarely gets used as a tub. Converting it to a walk-in shower means removing the tub, moving the drain to suit the new shower, building a new waterproof pan and tiling the walls and floor. The Livermore shower remodels on this page were built on new hot-mop pans, with pebble floors, niches and glass enclosures.
Code basics for a new shower
California's plumbing and residential codes set minimums for every new shower. Pleasanton's bathroom alteration handout, based on the 2022 California codes, sums up the main ones:
- A finished interior of at least 1,024 square inches that can fit a 30-inch circle (CPC 408.5, 408.6)
- Shower doors that swing out, with a clear opening of at least 22 inches (CPC 408.5, 408.6)
- A pressure-balancing or thermostatic valve limited to 120°F (CPC 408.3)
- A non-absorbent wall finish at least 6 feet above the floor (CRC R307.2)
- Tempered glass where glazing in or near the shower is less than 60 inches above the floor (CRC R308.4)
- An exhaust fan of at least 50 CFM, even when the bathroom has a window
Permits and inspections
Moving a drain or replacing a shower valve is plumbing work, so a tub-to-shower conversion usually needs a permit. The inspector checks the shower pan before tile goes on, then signs off at the final. Code editions change every three years and each city adds its own details, so QRS confirms the current requirements with your city and handles the permit.
Choices that make a walk-in shower work
The showers in our project gallery show what homeowners ask for most:
- Recessed niches instead of a shower caddy
- Pebble or mosaic floors, which give good grip underfoot
- Linear drains that let the floor slope one way
- A handheld shower on a slide bar next to the fixed head
- Large-format wall tile with fewer grout lines to clean
- Frameless or framed glass doors and fixed panels
Sources
Where we work
QRS is based in Livermore and provides walk-in showers and tub-to-shower conversions across the Tri-Valley, East Bay and South Bay. See the city pages for local permit details:
Walk-in Showers from our project gallery
Photos from QRS jobs. No stock images.







From first call to final inspection
Reach out
Call or send the form. Tell us what you want to change.
In-person estimate
We visit, measure and walk through the scope. Your written estimate arrives by email within 24 to 48 hours.
Permits and build
We handle permits and inspections, then build on schedule and clean up daily.
Final walkthrough
Final inspection and a walkthrough with you, backed by a 5-year warranty on labor and raw materials.
Walk-in showers and tub-to-shower conversions questions
Can you convert my bathtub into a walk-in shower?
Yes. QRS removes the tub, relocates the drain and valve as needed, builds and waterproofs a new shower pan, then tiles and installs the fixtures and a glass enclosure. The permit and city inspection are included.
What is the minimum size for a shower in California?
The California Plumbing Code requires a finished interior of at least 1,024 square inches that can fit a 30-inch circle. A 32 by 32 inch shower meets that minimum. Larger walk-in showers are common in remodels.
Do I need a permit to convert a tub to a shower?
Usually, yes, because the drain and shower valve change. The inspector checks the shower pan before tile and signs off at the final inspection. QRS handles the permit and inspections.
What waterproofing does QRS use under the tile?
For many showers QRS builds a traditional hot-mop pan: layers of hot asphalt and felt that form a waterproof basin under the mortar bed and tile. The pan is water-tested and inspected before tile goes on.
How do I get a walk-in shower estimate?
Call (925) 997-7705 or use the contact form. We visit, measure the bathroom and go over your options, and you receive an accurate written estimate by email within 24 to 48 hours. Estimates are free.
Often combined with this project
Bathroom remodeling
Walk-in showers, tub replacements, double vanities and full primary-bath remodels, waterproofed and tiled the right way.
Learn more 02Whole-home remodeling
Several rooms, one plan. Combine kitchen, bathrooms, flooring, stairs, paint and layout changes into a single coordinated project.
Learn more 03Repairs and punch lists
The list of fixes you keep meaning to get to, handled by a licensed contractor in one visit or a short project.
Learn more
